Molybdomancy, Divination by Molten Metal

The following article is from a guest writer and has not necessarily been vetted earlier than publication. If the content material of this article is objectionable or violates copyright, please report it.

The historical past of Molybdomancy could be traced back to Roman occasions, and it was extensively used in the British Isles within the Caroline period, but it isn’t a standard technique of divination right now. It’s a well-liked type of New Yr's entertainment in Scandinavia.

An affordable metallic with low melting point is used, often lead or tin, now-a-days an amalgam of each, but as lead is poisonous and may injury the nervous system and trigger blood issues, you need to watch out, avoid the fumes and smoke and never do that typically nor for a very long time. Also, you must be careful when disposing the rests. Lead is a heavy metallic and must be disposed of as environmental hazard, along with batteries.

You’ll be able to scry from the shiny surface of a pool of molten metallic, but it’s easier to drop the melted tin into a bowl of cold water, and let the metallic harden. It is going to type odd shapes because it hardens. The ensuing lump of metallic will then be studied and the longer term claimed by deciphering the totally different varieties and shapes of the piece.

One may also rotate the piece in candlelight and interpret the shapes of the shadows forged on the wall by the metallic piece.

You should use any record of tea leaf reading symbols and meanings as a information for deciphering the metallic lumps. There are many these lists found on-line.

Some conventional omens:

  • Should you see a ship, practice or aircraft in your piece, you’ll be able to see ahead a journey.
  • In case you see a key, you’ll be promoted.
  • A lady means issues with neighbors.
  • Small bubbles, like cash, imply cash.
  • If you can’t decide up a bit of tin from the water bowl, but the tin has shattered into small shards, you’re heading in the direction of a nasty yr.

This may also be achieved with molten wax, but then it's referred to as Ceroscopy.

Be careful when handling the recent metallic. The melting point of tin is perhaps low for a metallic, but it is still 230 ° C (450 ° F) and may cause dangerous burns.


Source by Ketutar Jensen

Comments are closed.